Toll Free:1800 3000 6650
SBR
Product Description
Super Bonding Repair Latex Champion also known as Latex Champion is used in mortar and concrete to increase water resistance, durability, and waterproofing. Since it is stable in damp, alkaline settings, cementitious compositions benefit from its use.
Features
- Waterproofing - Excellent waterproofing admixture which is alkali stable in cementitious mixtures.
- Chloride-free - Contains no chloride hence lesser chances of chloride contamination.
- Bonding - Provides excellent bond to concrete & masonry plaster, cementitious surfaces & most of the building materials.
- Strength - Improves tensile, flexural, and compressive strength as compared to control concrete hence increases the durability of structures.
- Shrinkage & Cracking – Reduces drying & aging shrinkage cracks.
- Multipurpose – It is multipurpose & economical product, easy to use.
SKUs: 200GM, 1Kg, 5Kg, 10Kg, 20Kg
Benefit & Advantages
- Waterproofing - Waterproofing mortars / concretes including terrace, toilets, chajjas, lift pits, balconies, masonry walls and slopping RCC roofs. Surface waterproofing.
- As a bond coat – For bonding of new concrete to old concrete, masonry stonework, plastering.
- Bonding slurry - for pinhole treatment on concrete surface & as repair mortar for overhead application.
- External rendering - Weatherproof & frost resistant render, high wear & erosion resistant render.
| Parameters | Specifications |
| Nature | White Colour Liquid |
| Composition | SBR latex & additives |
| Specific Gravity At 27⁰C | 1.02 – 1.09 |
| Non-Volatile Content | 37 - 40 |
| pH | 7.5 – 9.5 |
| Viscocity | 10 – 50 cps |
| Full Cure, Days | 7 |
| Adhesion Strength, At 14 Days, Rmp Surface Mpa | >1 (Concrete surface failure) |
| Slant-Shear Bond Strength, At 7 Days, N/Mm2 Astm C882 | >2 (concrete failure) |
- Prior to application of w-Shield SBR, all surfaces must be prepared properly to avoid failure.
- Ensure that surface is cleaned, free from dirt, soil, oil release agents, laitance and any other foreign materials which may impair the bond, penetration and / or the overall performance. This can be done by scarifying, grinding, water blasting, sand blasting, acid washing or any other approved method.
- Remove chemically any efflorescence, form oil, mould etc.
- Ensure to fill cracks / honeycombs / holes / faulty construction joints with mortar made of w-Shield SBR, cement and super fine sand and allow it to touch dry.
- Pre-wet / dampen all prepared concrete surface before application. Remove any excess of water prior to application.
- Waterproofing - Waterproofing mortars / concretes including terrace, toilets, chajjas, lift pits, balconies, masonry walls and slopping RCC roofs. Surface waterproofing.
- As a bond coat – For bonding of new concrete to old concrete, masonry stonework, plastering.
- Bonding slurry - for pinhole treatment on concrete surface & as repair mortar for overhead application.
- External rendering - Weatherproof & frost resistant render, high wear & erosion resistant render.
- CLEANING: Clean tools and equipment with water before the material hardens.
FAQs
Ans: wShield SBR is a styrene butadiene resin with a latex base. For concrete and mortars used in waterproofing, cement plasticizer is a valuable ingredient. It also works as a bonding agent for repairs.
