We Are Available:-

EX-33 Stone & Glass Expert

  2. Home
  3. Brands
  4. Homesure TileEx
  5. EX-33 Stone & Glass Expert
Image

Product Description

Tile Adhesive EX 33 Stone & Glass Expert (White) is a high polymer modified; Portland white cement-based tile adhesive applicable for fixing vitrified/ fully vitrified tiles, glass mosaic tiles, all stones, dense and large dimension tiles & slabs. It is mainly suitable for tiles with an apparent porosity less than or equal to 3%. It is more demanding for wet areas, submerged areas, etc. Tile Adhesive EX 33 Stone & Glass Expert (White) consists of cement, graded sand, and specialized polymers which combine to give high bond strength, water retention, superior workability, and unique properties.

Features

  • No shrinkage
  • Increase productivity.
  • No curing required.
  • Highly water resistant
  • No need for hacking
  • Excellent adhesion to base plaster/concrete surface

SKUs: 20kg

Benefits & Advantages

  • Suitable for interior and exterior floors applications
  • Can be used for new/ old walls and tile on tile application.
  • Consistent work quality
  • High Durability
  • Negligible waste
  • Save time.
Parameters Specifications
Spreadability Spread easily with good notchability
Open Time >5 minutes
Adjustability >5 minutes
Slip Resistance < 0.5 mm
Pot Life > 30 minutes
Density

1.5 -1.9 g/ml
Tensile Adhesion Strength (Dry Condition, After 28 Days) Minimum 1.0 N/mm2
Tensile Adhesion Strength (Wet Condition, After 28 Days) Minimum 1.0 N/mm2
Shear Adhesion Strength (Dry Condition, After 28 Days) Minimum 1.25 N/mm2
Shear Adhesion Strength (Heat Aging Condition, After 28 Days) Minimum 1.0 N/mm2
Shear Adhesion Strength (Wet Condition, After 28 Days) Minimum 1.0 N/mm2

SURFACE PREPARATION-

  • Clean the wall surface with wire brush & potable water.
  • Re-plaster the area with HomeSure Ready-Mix Plaster if necessary.
  • Fill up any cracks in the base plaster by using HomeSure Crack Fillers.

 

MIXING-

  • Take approx.200-300 ml of clean water for 1 Kg of Tile Adhesive EX 33 Stone & Glass Expert in a clean bucket. It is very important to add material into water and not vice versa.
  • Stir continuously for 3-5 min. to obtain a homogeneous paste.
  • Allow the resultant paste to stand for about 10 min.
  • Re-mix again for about 2 min. The mixture is now ready to apply.
  • Dampen the surface to be plastered with water. Allow excess water to drain off.
  • The tiles should be immersed in water for two hours before fixing.
  • Apply the material with a 6mm notched trowel. Spread it evenly.
  • Fix the tile and remove the excess mixture and clean it with a cloth.

 

PRECAUTION-

  • Do not add more water than recommended.
  • Maximum thickness should not be more than 3mm.
  • Do not directly use on gypsum plaster surface, paint, wood, and metal.

 

Before tile-on-tile application, ensure that the original tiling surface has enough roughness to provide the required high strength bonding.

Product Application Video

FAQs

Q1- How to clean the surface after applying the product?

Ans: After fixing the tile remove excess mixture and clean it with a cloth.