Toll Free:1800 3000 6650
Coarse Putty
Product Description
The wall putty known as coarse putty was created specifically as a foundation coat to hide unevenness and pinholes in plastered surfaces and prepare the walls and ceilings for the final application. It can be used as a base coat for putty because it is white. White cement, polymers, and minerals of the highest grade are included.
Features
- Can be used on ceiling, Interior & Exterior walls
- Evenness of wall/Celling surface
- Reduction in cracks
- Excellent workability
- Fast drying, Hard and Tough film
- Long Lasting
- UV Resistance
SKUs: 20kg, 30kg
Benefits
- Bonding to the base plaster
- Reduce putty consumption
- High Durability
- Save Time
- Cost-Effective
| Parameters | Specifications |
| Whiteness | > 70 % |
| Consistency | 25 – 30 % |
| Pot Life | > 60 minutes |
| Density | 1.7 -1.9 g/ml |
| Compressive Strength | > 6.0 MPa |
| Coverage | 2-3 Sq. Ft./ 1 kg |
| Shelf Life | Store in cool, dry, and well-ventilated place away from heat source or direct sunlight |
- Dampen the surface to be plastered with clean water. Allow excess water to drain off.
- Apply the first coat of coarse putty with a putty patra or blade to a thickness of 2-3mm.
- Cover all undulations and rough surface in 1st coat.
- Allow the surface to dry for at least 3 to 4 hours.
- If needed, then apply 2nd coat of 1-2 mm after the 1st coat completely dried.
- Application of fine wallputty is a must on top of Coarse Putty.
FAQs
Ans: Evenness of wall/Celling surface, Highly Durable, Water Resistant, Strong bonding to the base/concrete plaster, Reduction in cracking, reduced putty consumption, Saves time, Cost-Effective, Ease of use at site, Excellent Workability.
