Toll Free:1800 3000 6650
Gypsum Silver Plaster
Product Description
Gypsum-based Indian Gypsum Plaster is a lightweight plaster that can be applied to most interior surfaces, including brick, block, and concrete.
Features
- Faster setting time than cement plaster
- 50% lighter than sand cement plaster; reduces structural load on building.
- Can apply directly on bricks, blocks, RCC & sand cement surface.
- No water curing required.
SKUs: 20kg, 25kg
Colour
- Off White
Benefits
- Smooth finish
- Cost- effective
- No shrinkage cracks.
- Excellent bonding
- Light in weight
- Imparts high coverage.
- Zero maintenance
| Parameters | Specifications |
| Whiteness | > 65 % |
| Fineness (150 Micron) | < 5.0 % |
| Setting time | 8 - 25 minutes |
| Density | 0.9 -1.1 g/ml |
- Clean loose particles, dirt, grease, and traces of adhering material from the wall surface with the help of sandpaper, putty blade or by wire brush. Pre-wet the surface before application to achieve good workability and higher coverage.
- Mix Gypsum Plaster (Silver)to water and not water to powder. Water to plaster ratio should be (1 part of water and 1.5 part of Gypsum Plaster (Silver)to be maintained to provide a good cohesive workable mix.)
- Mix Gypsum Plaster (Silver)to water with the help of hand to form a uniform lump free paste.
- Install the wooden strip/dhada or install the levelling strip in the area where the paste needs to be applied.
- Apply the 1st coat approx. up to 10 mm to 12 mm of thickness, before the first coat sets rake and cross rake the surface.
- Fill in any hollow area, level off and compact the surface. Before levelling wait for 5-10 minutes for initial set, then apply the final finish coat.
- Level the surface by using aluminum level patty.
- After complete drying for usually 72 hrs. (Depending on the thickness and humidity), the plain smooth levelled surface is ready for painting application.
- Use the material instantly after mixing.
- Once the mix has begun to set, additional dry material should not be added, as performance properties of plaster will get altered, thus affecting workability, cohesiveness, adhesion, and strength.
- A single coat should not exceed more than 8 mm to 10 mm of thickness.
- The surface on which the material needs to be applied should be levelled and pre-wet properly.
- Gypsum Plaster (Silver)should not be applied on surface which is subjected continuous seepage or dampness.
Product Application Video
FAQs
Ans- Gypsum Plaster (Silver) is light weight gypsum-based plaster suitable for application on most internal surfaces including brick, block, and concrete.
