Toll Free:1800 3000 6650
EX-11 Ceramic Expert
Product Description
Product details- Tile Adhesive EX 11 Ceramic Expert is a grey cement-based powder-formed adhesive that gives better quality strength. This product is designed for fixing ceramic and clay tiles for internal dry area applications only. Tile Adhesive 11 Ceramic Expert is a general-purpose adhesive, easy to handle, and requires only the addition of clean water to produce easily workable mortar. Application ideal for tiles with apparent porosity greater than 3%.
Product details- Tile Adhesive EX 11 Ceramic Expert is a grey cement-based powder-formed adhesive that gives better quality strength. This product is designed for fixing ceramic and clay tiles for internal dry area applications only. Tile Adhesive 11 Ceramic Expert is a general-purpose adhesive, easy to handle, and requires only the addition of clean water to produce easily workable mortar. Application ideal for tiles with apparent porosity greater than 3%.
Features
- Saves time.
- Increase productivity.
- Cost–Effective
- No curing required.
- Highly water resistant
- No need for hacking
- Excellent adhesion to base plaster/ concrete surface
SKUs: 20kg
Benefits & Advantages
- Suitable for internal/ external applications
- Easy to use – Addition of water on site.
- Can be used on new / old wall and floor.
- Consistent work quality
- Easy tile installation that enables high productivity
| Parameters | Specifications |
| Spreadability | Spread easily with good notchability |
| Open Time | >5 minutes |
| Adjustability | >5 minutes |
| Slip Resistance | < 0.5 mm |
| Pot Life | > 30 minutes |
| Density | 1.5 -1.9 g/ml |
| Tensile Adhesion Strength (Dry Condition, After 28 Days) | Minimum 0.5 N/mm2 |
| Shear Adhesion Strength (Dry Condition, After 28 Days) | Minimum 1.0 N/mm2 |
Surface Preparation-
- Clean the wall surface with wire brush & potable water.
- Re-plaster the area with HomeSure Ready-Mix Plaster if necessary
- Fill up any cracks in base plaster by using HomeSure Crack Filler
MIXING-
Take approx.200-300 ml of clean water for 1 Kg of Tile Adhesive EX 11 Ceramic Expert in a clean bucket. It is very important to add material into water and not vice versa.
- Stir continuously for 3-5 min to obtain a homogeneous paste.
- Allow the resultant paste to stand for about 10 min.
- Re-mix again for about 2 min. The mixture is now ready to apply.
- Dampen the surface to be plastered with water. Allow excess water to drain off.
- The tiles should be immersed in water for two hours before fixing.
- Apply the material with a 6mm notched trowel. Spread it evenly.
- Fix the tile and remove the excess mixture and clean it with a cloth.
PRECAUTION-
- Do not add more water than recommended.
- Applicable for ceramic tiles only
- Maximum thickness should not be more than 3mm.
- Do not use on gypsum plaster surface, paint, wood, and metal.
Product Application Video
FAQs
Ans: After drying, cement contracts, leaving voids beneath the tile's surface. Any impact will cause the tiles to break or crack in these vulnerable areas of the flooring. Adhesives are the best choice for a tile installation that is long-lasting and trouble-free.
