Toll Free:1800 3000 6650
Micro Concrete
Product Description
Micro Concrete is combination of cement, high quality graded fine aggregate, shrinkage compensating agents and dispersion agents. It gives high-strength and designed for precision grouting and general construction applications. It has excellent flowability, workability & proper particle size to reach small & congested reinforcement.
Features
- Develops high initial and ultimate final strengths
- Makes repaired sections highly durable
- Rapid strength gain to facilitate early reinstatement
- Can be used as a pumpable or pourable repair concrete where access is restricted
- Repair of damaged concrete structures e.g., Columns, Beams, Slabs, etc.
SKUs: 25kg
Benefit & Advantages
- Easy to mix and apply
- High flow characteristic
- High strengths with low permeability
- Good bond with old concrete
- Contains no added chloride
| Parameters | Specifications |
| Consistency | 10 – 15 % |
| Flow at 0 Minute | 200 – 250 mm |
| Flow at 20 Minute | 150 – 200 mm |
| Setting time | < 10 Hours |
| Bleeding | No Bleeding or Foam on top |
- Take approx.100-150 ml of clean water for 1 Kg of Micro Concrete in a clean bucket. It is very important that add material into water and not vice versa.
- Stir continuously for 3-5 minutes by using mechanical stirrer or by hand till a pourable consistency is obtained with recommended water –powder ratio.
- Cure the surface with water before application.
- Pour the Micro Concrete after mixing into the area to be covered /filled/watertight shuttering.
- During filling if required, ensure proper air displacement.
- Cure the repaired concrete for minimum 7 days before removing the shuttering.
- Thickness should be in between minimum of 25 mm to maximum 100 mm. This will prevent the formation of any cracks after healing.
- Used of gravels (5 to 12 mm) is recommended for bigger depth.
FAQs
Ans- HomeSure Micro Concrete can be applied at the thickness of up to 100 mm.
