Toll Free: 1800 3000 6650
Spray Plaster
HOMESURE WALLEX Spray Plaster
Spray Plaster is a polymer-modified, ready-to-use plaster designed to provide a smooth finish on internal (plastering) and external (rendering) surfaces with a stronger bond to the substrate. Spray Plaster gives strong adhesion on walls/ceilings with excellent water resistance and crack-free workability that will protect the wall. Its special formulation enables spray application through a machine, giving a significantly lower application cost. It provides a smooth, inert, high-quality surface to ceilings, internal and external walls, and a durable base for application. It speeds up construction, saves time, minimizes wastage, and requires less labour.
Features
- Reduce rebounding loss
- Cracks free wall
- Providing high compressive strength
- Smooth Plastering
- Higher durable plaster
- Excellent Coverage
- It has high adhesion strength.
SKUs: 40kg
Benefit & Advantages
- Pre-mixed material, only water to be added
- Faster application
- Used for interior as well as exterior wall surface
- It provides saving on time and workmanship.
- Easy to apply and give shape.
- Negligible on-site wastage and mixing time
- Cost-Effective
Technical Data
Applications
Technical Data
| Parameters | Specifications |
| Consistency | 15 – 25 % |
| Pot Life | > 60 minutes |
| Setting Time | 30 – 600 minutes |
| Density | 1.8 to 2.1 g/ml |
Applications
- Clean loose particles, dirt, grease, and traces of foreign materials from the surface, if necessary, by using wire brush/sandpaper or by chipping.
- For loose plaster areas or wall which are not even, then remove the defective material. The surface should be properly clean.
- The substrate should damp and excess water to be swept off.
- 150-250 ml of clean water is required for 1 Kg of Spray Plaster sample.
- Mixing is done automatically in the machine.
- Tools and water used in mixing must be clean.
- Contamination from previous mixes can shorten the setting time and in turn reduce the strength of the plaster when set. Hence, clean the machine well, first remove previous all material, and clean the hose pipe, roto stator and mixing hopper.
- Water to plaster ratio should be maintained to have good cohesive workable mix. The water plaster ratio in Ready mix machine spray plastering application remain fixed hence there is very little chance of error once the machine is set.
- The dry and absorptive surfaces should be wetted before the application.
- It can be applied directly to brick, ACC, concrete surface walls.
- It can be applied with appropriate plastering machines. The material applied with the plastering machine should be sprayed on the surface evenly. The surface should be levelled out with float.
- Spread a mixture evenly to the required thickness & finish using straight edge.
- Apply aluminium level patty from bottom to top direction followed by left to right and right to left direction to level the plaster.
- Plain plaster wall ready for next application
- Curing can be started after 24-hour, it is recommended 2-3 times a day for 7 days.
- Do not add more water than recommended.
- The maximum thickness for the 1st coat should not exceed 10-12 mm.
- Spray Plaster contains non-toxic material but still, it is important to wear a safety kit when mixing and handling.
FAQs
Ans: A project can be substantially reduced in time & cost when sparay plaster is used, which benefits both the contractor and client.
Ans: Applying process spray plaster.
- Pre-mixed material, only water to be added
- Faster application
- Used for interior as well as exterior wall surface
- It provides saving on time and workmanship.
- Easy to apply and give shape.
- Negligible on-site wastage and mixing time
- Cost-Effective
Ans: Spray plaster is not the same as Gypsum multi finish. It resembles a filler rather than a plaster and is intended to be applied using an airless sprayer. It is applied swiftly, and the finish is flawless at level 5.
Ans: Applied in coats of 1-1.5m thickness. Drying time 12-24 hours prior to decoration.
