Toll Free: 1800 3000 6650
Cementitious Tile Grout
HOMESURE TILEEX Cementitious Tile Grout
TileEx Cementitious Tile Grout is a polymer-modified,
cement-based grout with selected fillers, designed for
filling tile joints up to 3 mm. It offers low shrinkage,
excellent adhesion, and good workability.
Features
- Easy to use
- Good workability
- Excellent adhesion to concrete
- Low shrinkage
- Wide range of colours
SKUs: 20kg
Benefit & Advantages
- Suitable for interior and exterior floors applications
- Can be used for new/ old walls and tile on tile application.
- Consistent work quality
- High Durability
- Negligible waste
- Save time.
Technical Data
Applications
Technical Data
| Parameters | Specifications |
| Nature | Free flowing powder |
| Composition | Cement, polymers, selected fillers and pigments |
| Colour: | Available in wide range of attractive colours |
| Water demand : | 30 – 35% |
| Pot life @ 30°C: | Minimum, 30 minutes |
| Setting time @ 27°C: | 24 hours |
| Foot traffic @ 27°C: | 24 hours |
| Heavy traffic @ 30°C: | 72 hours |
| Compressive strength: | ≥ 15 MPa |
| Tensile adhesion strength: | ≥ 0.5 MPa |
Applications
SURFACE PREPARATION
- Before starting to grout, remove any debris from the grout joints. Dust can be eliminated using compressed air jetting. Ensure that the joints are free from water, oil, dirt, and other contaminants.
- Clean the tile surface by wiping it with a sponge to remove dirt and dust. Do not use acids to clean the tiles.
- Cleanliness and surface roughness are essential for good adhesion of the grout.
- Proper surface preparation is crucial; without it, successful grout
performance cannot be guaranteed
MIXING
- Mortar is prepared by mixing TileEx Unsanded Grout
with 30-35% by weight of water using mechanical stirring for 2-3 minutes until a lump-free consistency is achieved. - To avoid colour variation, dry blend the powder first if using two or more bags.
- The grout paste remains workable for 30 minutes at 27°C.
APPLICATIONS
- Firmly press the grout into the joints using a spatula, putty blade, or any suitable applicator, ensuring the joints are completely filled.
- Apply standard grouting techniques to work the grout into the tile joints.
- Ensure the entire joint is fully packed with grout. Remove excess material from the joints and surface by moving a squeegee diagonally across the grout lines.
CLEANING
- Wipe off any stains on the tiles with water after 2-3 hours.
- Use a damp sponge to clean the grout from the tile surface.
- Clean tools with water immediately after use or application.
Product Application Video
FAQs
Ans: After fixing the tile remove excess mixture and clean it with a cloth.
Ans: It is useful for new/old wall and floor & tile on tile application.
Ans: Ceramic tile adhesives are recommended for swimming pools. We suggest using TileEX 11 Ceramic Expert.
