Block Jointing Mortar


BuildWell Block Jointing Mortar by Walplast is a superior water resistant cement based mortar specially formulated for joining blocks. This mortar is specially designed and manufactured under stringent quality controls to give superior adhesive strength, higher durability and a strong bond between the blocks. This unique combination enables this mortar to be thinner, compact and versatile.

- Saving of time and manpower.

- Lesser shrinkage and seamless structure.

- High strength adhesion.

- Consistency of material and quality.

- Can be applied by an ordinary mason.

- Gives better levelling.

- Easy to mix and faster to apply.

- No water curing is required.

- Thinner layer guarantees to be more cost-effective.

- It is Polymer modified pre-mixed, you only need to add water.

- Prevents seepages and water percolation.

- Excellent bonding to the AAC Blocks.

- Thickness of only 3mm compared to 12mm of a conventional mortar.

  • The AAC, fly ash and hollow blocks should be dry, clean and pre-wet before application. Do not apply on dirty/greasy surface.
  • Add BuildWell Block Jointing Mortar to water and mix well for 5-10 minutes (Recommended mixture is 23% water).
  • Apply the mix on clean, dry block surface, with mason’s notch trowel to make an even 3-4mm joint layer.
  • Correction time for re-alignment is up to 10 minutes to ensure perfection of block placement.
  • BuildWell Block Jointing Mortar is self-curing and does not require water curing post application.
  • BuildWell Block Jointing Mortar is now ready for plastering application.

Want to transform your walls into a masterpiece?